How do I Power Cycle my DigitalJetstream VOIP adapter?

 

  1. First you want to unplug the A/C power adapters from your high speed broadband modem and also your router if you have one.
  2. Next, unplug the A/C power adapter from your DigitalJetstream VOIP phone adapter.
  3. Wait a few minutes and first plug in your modem, then router (if you have one), then your DigiatlJetstream VOIP phone adapter.
    You may have to wait a few minutes for all the lights to light up.
  4. Wait a couple of minutes until the Power, WAN, and LAN lights light up.
  5. Make sure your computer has an Internet connection, and check to see if you have a dial tone.
Congratulations, the power cycle process is complete.
 
DigitalJetstream VoIP Telephones
  • 3 Users Found This Useful
Was this answer helpful?

Related Articles

Why do I not have a dial tone?

If you are unable to hear a dial tone, in most instances it is because the phone adapter is not...

My device has connectivity, but will not register.

If your Internet provider includes a modem that also acts as a router, you may need to disable...

How do I initiate 3-Way Calling?

 In order to establish 3-Way Calling you must first have a phone that is capable of 3-Way...

Why am I having audio problems?

  Audio problems are usually an issue pertaining to a connected NAT device (i.e....

Why would I need to Power Cycle my adapter?

Power cycling, to put simply, is just turning off your device and then turning it back on. You...