How do I Power Cycle my DigitalJetstream VOIP adapter?

 

  1. First you want to unplug the A/C power adapters from your high speed broadband modem and also your router if you have one.
  2. Next, unplug the A/C power adapter from your DigitalJetstream VOIP phone adapter.
  3. Wait a few minutes and first plug in your modem, then router (if you have one), then your DigiatlJetstream VOIP phone adapter.
    You may have to wait a few minutes for all the lights to light up.
  4. Wait a couple of minutes until the Power, WAN, and LAN lights light up.
  5. Make sure your computer has an Internet connection, and check to see if you have a dial tone.
Congratulations, the power cycle process is complete.
 
DigitalJetstream VoIP Telephones
  • 3 Kasutajad peavad seda kasulikuks
Kas see vastus oli kasulik?

Seotud artiklid

Why would I need to Power Cycle my adapter?

Power cycling, to put simply, is just turning off your device and then turning it back on. You...

Why am I having audio problems?

  Audio problems are usually an issue pertaining to a connected NAT device (i.e....

Why do I hear a busy tone when trying to make outgoing calls?

When you hear a busy tone when trying to place an outgoing call, the problem may be related to...

Why do I not have a dial tone?

If you are unable to hear a dial tone, in most instances it is because the phone adapter is not...

Why does my Message Waiting Indicator (MWI) always stay on?

It seems that nearly all users with MWI issues are users using an ATA behind a router. It's...